.
اشترك معنا
اشترك معنا في النشرة اليومية لتصلك اخر فرص الوظائف

@TargetJo Twitter

المتصلون
يوجد 242 زائر حالياً
الصفحة الرئيسية الوظائف الحالية في الخليج A leading factory specialized in oil & gas in KSA is seeking to fill the following positions: - Electrical - Operator Trainer - Instrument Technician Trainer [PCST] - Mechanical Trainer - Welding Trainer - Pipefitter / fabricator Trainer

A leading factory specialized in oil & gas in KSA is seeking to fill the following positions: - Electrical - Operator Trainer - Instrument Technician Trainer [PCST] - Mechanical Trainer - Welding Trainer - Pipefitter / fabricator Trainer

الوظائف الحالية في الخليج

فـــرص عمــل          JOB VACANCY 

 

A leading factory specialized in oil & gas in KSA is seeking to fill the following positions:

 

Electrical:

  • 4 years’ experience as maintenance Engineer or 11 years’ experience as technician in class 1, Division 1, Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants
  • Able to troubleshoot and repair AC machines, able to maintain HV transformers HV/LV switchgear, UPS (Interruptible power supply) systems and Motor operated valves, using electrical/ electronic, test equipment, schematics and one line diagrams.
  • Maintain and troubleshoot HV breaker and transforms.

Basic operation / programming of PLC.

Operator Trainer

  • 11 years’ experience as a qualified Supervising or Control board Operator for the Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants or BSc with minimum 4 years’ experience).
  • Experienced in One or more of the following Processes: Distillation/fractionation, reactor/catalytic, cryogenic, hydro treating, GOSP, WIP, utilities or tank farm operations. DCS experience Preferred.

 

Instrument Technician Trainer [PCST]

  • 11 years’ experience in Pneumatic, Electronic and Digital Instrumentation in Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants or BSc with minimum 4 years’ experience).
    • Experience should include PM of Field Devices (DVCs, Smart Transmitters, conventional Transmitters, Valves, Controllers and FF devices).
    • Troubleshooting Process Control Systems.

Knowledge and experience on DCS (Yokogawa Centum, HoneywellTDC300, DeltaV) and PLC (Trion, Siemens, AB) is an advantage

 

Mechanical Trainer

  • 4 years’ experience as mechanical engineer or 11 years field experience as a mechanical maintenance technician in Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants
  • Experience in disassembly, inspection and repair of valves, pumps, gearboxes, and compressors. Experience in operating lathe machines is preferred.
  • Knowledge and experience in the following mechanical subjects: Bearings and Lubrication, LASER alignment, Vibration analysis, motor operated valve actuators, Mechanical seals, and Turbines.

 

Welding Trainer

  • 11 Years’ experience as a welder working in Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants Candidate should have served minimum 3 years apprenticeship or approved CITB training
    • Candidate should have hands on experience of SMAW method, welding of structural steelwork and  Pipe welding of carbon steel, using both E-6010 and E-7018 electrodes for open root, fill, and cap, plate sizes up to ¾ inch thickness and pipe sizes from 1 inch up to 8 inch schedule 40 – schedule 140 pipe or BSc with minimum 6 years’ experience).
    • Candidate should have hands on experience in GTAW of Stainless steel, Carbon Steel and low alloy  pipe welding of small bore pipe 1 inch to 2 ½ inch diameter
    • Candidates should have been certified to 100% Radiographic standards in accordance with any of the following: AWS, ASME/ANSI, API, BS, ASTM Codes and standards for welding certification

 

Pipefitter / fabricator Trainer

  • 11 Years’ experience as a pipefitter fabricator in the Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants, Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years’ experience).
  • Plans work assignments to determine materials, equipment, and tools requirements to determine materials, equipment, and tools requirements in fabricating threaded, welded and non-metallic pipe spool fabrication.
  • Cut, threads, bends joints, and assembles pipe for fitting and fabrication (Ferrous/Non Ferrous/Non-Metallic).
  • Cut, prepares, bends, and drills plate for fabrication.
  • Perform Hydrostatic testing of pipe spools. Knowledge of rigging equipment and procedures helpful

Only qualified candidate are requested to send their CVs to the following Email:

 

eng@targetjo.com

 

 

 


كما يرجى كتابة مسمي الوظيفة فى خانة   "subject"

لـلأهـــمـــيــــــــــــة

TARGETJO

معتمدون لانجاز جميع التأشيرات الواردة الى قنصلية المملكة العربية السعودية

ادعوا اصدقائك للاشتراك معنا لتصل جميع اعلانات التوظيف الى بريدكم الالكترونى مباشرة

 

معتمدون لانجاز التأشيرات و تصديق الشهادات لدى الملحقية الثقافية و قنصلية المملكة العربية السعودية

المكتب الرئيسي والادارة: عمان - شارع الجاردنز - مقابل مطعم جبري المركزي - مجمع رقم 105 - الطابق الرابع - للتوظيف وتقديم السير الذاتية وتخليص المعاملات وتصديق الشهادات

هاتف 5532330-6-00962 / 5512555-6-00962 /
00962-6-5532359

تخليص تأشيرات العمل و تصديق الشهادات
فرع جبل عمان - الدوار الاول - شارع البيهقي - بناية رقم 9 - الطابق الارضي

هاتف 0795846151 - 0797537785